Content
31 modules
Rating
Instructor
Alice Overton
Released
08 May 2017
Price
$100.00 USD
Description
This course is part two of a two part series in Machine Tools ( part 1) and Machine Technology ( part 2) will require the use of the NIMS approved textbook that is titled "Precision Machining Technology"
The videos provided will enhance your learning experience. It is recommended that you watch the videos first and then continue with the reading assignments. Please note that any reference to a Chapter within the videos or the Power points should not be of concern.
You should pace yourself and complete the amount of work each week that will ensure that you are done on time.
There are 29 Modules in this series, you are required to have the entire sequence of courses completed by the end of the semester. If you work on just 2 modules each week, you will be done on time. (Tests are included in the count as a module )
There are not any assignments that need to be turned in, your tests are automatically graded and that will determine your grade point average. You do not need to do the questions at the end of the Unit. That means the review tests do not need to be completed.
If you have any questions please contact: ntmausupport@ntma.org
1.
A-1-Semester 2 Section 5 Reading Assignment. Begin the textbook reading in Section 5 - Turning
{{ vm.helper.t('reports.module') }}
2.
A-2 -Semester 2 - Section 5 - Overview Machine Tools - Engine Lathe
{{ vm.helper.t('reports.module') }}
3.
A-3 - Semester 2 - Section 5 - Overview Machine Tools - Engine Lathe
{{ vm.helper.t('reports.module') }}
4.
A-4- Semester 2 - Section 5 - Overview Machine Tools - Engine Lathe - Work Holding
{{ vm.helper.t('reports.module') }}
5.
A-5-Semester 2 - Section 5 - Unit 4 - Machine Tools - Terminology of Threads
{{ vm.helper.t('reports.module') }}
6.
A-5 -1 -Semester 2 - Section 5 - Unit 4 - OPIONAL READING - Machine Tools Power Point - Screws / Threads / Taps NOTE_ The 1st slide refers to Chapter 8, that is not correct, do not pay attention to that reference.
{{ vm.helper.t('reports.module') }}
7.
A-6-Semester 2 - Section 5 - Unit 3 - Machine Tools - How to cut a thread on a lathe
{{ vm.helper.t('reports.module') }}
8.
A-6-1-Semester 2 - Section 5 - OPTIONAL READING - Machine Tools Power Point - Tool Materials and Single Point Cutting Tools. This Powerpoint 1st slide refers to Chapter 4, please don't pay attention to that.
{{ vm.helper.t('reports.module') }}
9.
A-7- Semester 2 - Section 5 - Overview Machine Tools - Engine Lathe - Taper Turning
{{ vm.helper.t('reports.module') }}
10.
A-8-Semester 2 - Section 5 - Machine Tools - Discontinuous Chips ( The reference to Chapter 3 in this video is not applicable to the textbook materials but extremly helpful in useful knowledge )
{{ vm.helper.t('reports.module') }}
11.
A-8-1-Semester 2 -Section 5 - Machine Tools - Optional Reading !!! This Power Point has the first slide listed as Chapter 2, do not pay attention to that. This is optional materials to read- Fundamentals of Metal Cutting
{{ vm.helper.t('reports.module') }}
12.
A-9-Semester 2 - Section 5 - Machine Tools - Do not attempt this quiz until all of the videos and reading in Section 5 is completed Quiz
{{ vm.helper.t('courses.exam') }}
13.
B-Semester 2 Section 6 Reading Assignment . This reading assignment should be spread out over the next 6 weeks. If you read one unit per week, you will have it completed in 4 weeks
{{ vm.helper.t('reports.module') }}
14.
B-2-Semester 2 - Section 6 - Unit 3 - Machine Tools - Vertical Mill Parts
{{ vm.helper.t('reports.module') }}
15.
B-2-1Semester 2 - Section 6 - Unit 3 - Machine Tools - Vertical Mill Parts-2
{{ vm.helper.t('reports.module') }}
16.
B-3-1-Semester 2 - Section 6 - Unit 2 -Machine Tools Power Point - Milling Cutters and Milling
{{ vm.helper.t('reports.module') }}
17.
B-4-Semester 2 - Section 6 - Unit 1 - Machine Tools Types of Milling Cutters
{{ vm.helper.t('reports.module') }}
18.
B-5-Semester 2 - Section 6 - - Machine Tools - Tramming a mill
{{ vm.helper.t('reports.module') }}
19.
B-6-Semester 2 - Section 6 - Unit 3- Machine Tools- How to edge find
{{ vm.helper.t('reports.module') }}
20.
B-7- Semester two - Precision Machining Technology - Using and Edgefinder
{{ vm.helper.t('reports.module') }}
21.
B-8- Semester two - Precision Machining Technology - Milling a Pocket
{{ vm.helper.t('reports.module') }}
22.
B-9-Semester 2 - Section 6 - Unit 3 - Machine Tools - How to Square a Block on the mill
{{ vm.helper.t('reports.module') }}
23.
B-10-Semester 2 - Section 6 - Machine Tools: This quiz should not be attempted until all of the videos and reading are completed in Section 6
{{ vm.helper.t('courses.exam') }}
24.
C-Semester 2 Section 7 Reading Assignment - Grinding
{{ vm.helper.t('reports.module') }}
25.
C-1 -Semester 2 - Section 7 - Unit 1 - Machine Tools - Grinding Machines
{{ vm.helper.t('reports.module') }}
26.
C-2-Semester 2 - Section 7 - Unit 2 - Machine Tools - This Power Point has valuable information but it is "Optional" reading - Principals of Grinding
{{ vm.helper.t('reports.module') }}
27.
C-3-Semester 2 - Section 7 - Unit 2 - Machine Tools - Grinding Wheel Labeling
{{ vm.helper.t('reports.module') }}
28.
C-4-Semester 2 - Machine Tools Chapter 7 Quiz
{{ vm.helper.t('courses.exam') }}
29.
D-Semester 2 - Section 8 Reading Assignment - This is a large section in your textbook on CNC- In your next semester we cover CNC as a comprehensive and complete standalone module with simulators. There is not a test here in this topic
{{ vm.helper.t('reports.module') }}
30.
D-1-Semester 2 - Machine Tools - This video refers to Chapter 9, however do not pay attention to that reference. Just review the video it is on Numerical Controls
{{ vm.helper.t('reports.module') }}
31.
D-2-Semester 2 - Machine Tools Section 9 - Optional Reading- Power Point
{{ vm.helper.t('reports.module') }}
Shopping Cart
Your cart is empty